After Replacing the Disk, Make Sure to Tighten the Ring on the Platform 8 (Closest to the Outside of the Sand Tablet). If the Sand Tablet Makes Unusually Loud Noises, Remove It, and Use the Included Hex-wrench to Adjust the Screw on the Back Cover (18).
After Replacing the Disk, Make Sure to Tighten the Ring on the Platform 8 (Closest to the Outside of the Sand Tablet). If the Sand Tablet Makes Unusually Loud Noises, Remove It, and Use the Included Hex-wrench to Adjust the Screw on the Back Cover (18).
✨✨✨ Welcome to Xinxinbang ✨✨✨ Dental Lab Device JT-19 Wet Model Trimmer Abrasive Disc Wheel Gypsum Arch 500W Features: 1. Connect One End of the Water Tube to the Nozzle of the Wet Model Trimmer and the Other End to the Tap, Open the Valve 2. Connect the Waste-disposal Tube to the Unit 3. Connect the Power Cord, and Switch on the Power Switch (O=off, L=on) 4. When Braking, It Is Normal to Hear Clicking Before the Sand Tablet Stops. If the Sand Tablet Makes Unusually Loud Noises, Remove It, and Use the Included Hex-wrench to Adjust the Screw on the Back Cover (18) 5. To Check If You Need to Replace the Abrasive Disk, Rotate the Disk by Hand and Estimate: If the Platform Jumps More than 2mm, Change the Disk. After Replacing the Disk, Make Sure to Tighten the Ring on the Platform 8 (Cl.
Attention: If There Is some Abnormal Noise When Working on Possible Reason：① Axon Is Loosing ② Disc Is Not Plain Enough。 How to Solve It：①Dissemble the Disc⒃ with Spanner，Make the Snap Ring Tightly；② Change the Disc。 The Machine Does Not Work When Power on Possible Reason：① Fuse Get Burnt；② Motor Get Burnt；③ Switch Get Wrong。 How to Solve It：① Change the Fuse（22） Which Inside the Socket；② Change the Motor ③ Change the Switch Specifications Voltage: 110v/60hz Power: 500w Rotational Speed: 2800 RPM Dimensions: 44×35×35cm Weight of the Dental Trimmer: 20kg Content: 1x Jt-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment.
Attention: If There Is some Abnormal Noise When Working on Possible Reason：① Axon Is Loosing ② Disc Is Not Plain Enough。 How to Solve It：①Dissemble the Disc⒃ with Spanner，Make the Snap Ring Tightly；② Change the Disc。 The Machine Does Not Work When Power on Possible Reason：① Fuse Get Burnt；② Motor Get Burnt；③ Switch Get Wrong。 How to Solve It：① Change the Fuse（22） Which Inside the Socket；② Change the Motor ③ Change the Switch Specifications Voltage: 110v/60hz Power: 500w Rotational Speed: 2800 RPM Dimensions: 44×35×35cm Weight of the Dental Trimmer: 20kg Content: 1x Jt-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment.
