(82) 3221-3067

NEWSCheck Our Blog

Bring to the table win-win survival strategies to ensure proactive domination. At the end of the day, going forward.

10pcs DSl Plastic Castable Straight Anatomic Abutments Internal Hex Dental Lab

12 de agosto de 20260

10pcs DSl Plastic Castable Straight Anatomic Abutments Straight anatomic Peek abutments is a high-grade thermoplastic polymer made. These abutments are designed with a superior combination of strength, elasticity, and resilience. Peek abutments have become the best solution when for full mouth scanning. Unlike metal abutments that give you endless interference and should be used only with a special scan spray before even beginning any scanning, these peek abutments are made of plastic polymer and the scanning goes smooth and steady with a perfect adjacent picture. These abutments are fully biocompatible and aesthetic and they feature a natural tooth-color appearance for improved esthetics. Please mention the desired size in a note to a seller during the checkout. If none is selected, a random type will be sent. Straight Anatomic Peek abutments have great resistance to bacteria and vicious microorganisms, and they save their color till they are exchanged for the permanent abutment. It also has low electrical conductivity and is well suited for use in the oral cavity. Straight Anatomic Peek abutments were made for the fabrication of short-term provisional crowns. They enable clinicians to guide the soft tissue during the healing process, creating a natural emergence profile. Peek abutments have a very high mechanical strength, yet still can be easily shaped with dental burs because of the material specifications. With These Peek abutments, the patient is given an anesthetic solution during the period that the final restoration is being fabricated. Advantages: Biofriendly materialExcellent mechanical properties such as stiffness, toughness, and durabilityHigh chemical resistanceMRI compatibilityAbility to be sterilized without degradation in mechanical properties or biocompatibilityNatural color for excellent aestheticsProven hard and soft tissue biocompatibility THE LOT IS FOR 10 DSI PLASTIC CASTABLE STRAIGHT ANATOMIC ABUTMENTS

Read More

5pcs DSl Plastic Castable Straight Anatomic Abutments Internal Hex Dental Lab

12 de agosto de 20260

5pcs DSl Plastic Castable Straight Anatomic Abutments Straight anatomic Peek abutments is a high-grade thermoplastic polymer made. These abutments are designed with a superior combination of strength, elasticity, and resilience. Peek abutments have become the best solution when for full mouth scanning. Unlike metal abutments that give you endless interference and should be used only with a special scan spray before even beginning any scanning, these peek abutments are made of plastic polymer and the scanning goes smooth and steady with a perfect adjacent picture. These abutments are fully biocompatible and aesthetic and they feature a natural tooth-color appearance for improved esthetics. Please mention the desired size in a note to a seller during the checkout. If none is selected, a random type will be sent. Straight Anatomic Peek abutments have great resistance to bacteria and vicious microorganisms, and they save their color till they are exchanged for the permanent abutment. It also has low electrical conductivity and is well suited for use in the oral cavity. Straight Anatomic Peek abutments were made for the fabrication of short-term provisional crowns. They enable clinicians to guide the soft tissue during the healing process, creating a natural emergence profile. Peek abutments have a very high mechanical strength, yet still can be easily shaped with dental burs because of the material specifications. With These Peek abutments, the patient is given an anesthetic solution during the period that the final restoration is being fabricated. Advantages: Biofriendly materialExcellent mechanical properties such as stiffness, toughness, and durabilityHigh chemical resistanceMRI compatibilityAbility to be sterilized without degradation in mechanical properties or biocompatibilityNatural color for excellent aestheticsProven hard and soft tissue biocompatibility THE LOT IS FOR 5 DSI PLASTIC CASTABLE STRAIGHT ANATOMIC ABUTMENTS

Read More

10pcs DSl Standard Angulated Abutment 15° Titanium FDA Dental Lab Internal Hex

10 de agosto de 20260

10pcs DSl Standard Angulated Abutment 15° Titanium FDA Dental La DSI Angulated abutments are used when a change to the axis of the implant is required. DSI Angulated Abutments facilitate implant placement with greater width and height, avoid surgical intervention, reduce treatment time, reduce cost and allow a greater number of patients cases to be processed, who otherwise cannot be treated using the conventional technique. DSI Angulated Abutments have been made especially for situations that may arise where there is a difference between the planned long axis of the implant and the long axis of the planned prosthetic tooth. Please mention the desired size in a note to a seller during the checkout. If none is selected, a random type will be sent. Recommendation: Hand-tighten using a 1.25 mm hex. driver and then use a ratchet or motor mount with a force of 25 Ncm. Indications: Single-tooth replacement in the frontal region of maxilla. Fixed prosthesis on implants for distal extension in the maxilla. Fixed dentures on implants in the maxilla. Fixed partial dentures on implants in distal extension in the mandible. Solution for a misjudged direction of preparation for implants. Occasional anatomic problems for the placement of straight abutments. Features:Internal Hex Connection System Abutment Height: 9.0mm/ 11.5mm Diameter: Ø4.7mm Abutment Angle 15° Material: Titanium Pls mention in a note to a seller during checkout THE LOT IS FOR 10 DSI STANDARD ANGULATED ABUTMENTS 15°

Read More

5pcs DSl Standard Angulated Abutment 15 ° Titanium FDA Dental Lab Internal Hex

10 de agosto de 20260

5pcs DSl Standard Angulated Abutment 15° Titanium FDA Dental La DSI Angulated abutments are used when a change to the axis of the implant is required. DSI Angulated Abutments facilitate implant placement with greater width and height, avoid surgical intervention, reduce treatment time, reduce cost and allow a greater number of patients cases to be processed, who otherwise cannot be treated using the conventional technique. DSI Angulated Abutments have been made especially for situations that may arise where there is a difference between the planned long axis of the implant and the long axis of the planned prosthetic tooth. Please mention the desired size in a note to a seller during the checkout. If none is selected, a random type will be sent. Recommendation: Hand-tighten using a 1.25 mm hex. driver and then use a ratchet or motor mount with a force of 25 Ncm. Indications: Single-tooth replacement in the frontal region of maxilla. Fixed prosthesis on implants for distal extension in the maxilla. Fixed dentures on implants in the maxilla. Fixed partial dentures on implants in distal extension in the mandible. Solution for a misjudged direction of preparation for implants. Occasional anatomic problems for the placement of straight abutments. Features:Internal Hex Connection System Abutment Height: 9.0mm/ 11.5mm Diameter: Ø4.7mm Abutment Angle 15° Material: Titanium Pls mention in a note to a seller during checkout THE LOT IS FOR 5 DSI STANDARD ANGULATED ABUTMENTS 15°

Read More

10pcs DSl Straight Plastic Conical UCLA Castable Abutments NP Implant Dental Lab

4 de agosto de 20260

10pcs DSl Straight Plastic Conical UCLA Castable Abutments NP Castable components are intended for use by the dental technician for constructing the prosthetic restoration. DSI Castable Abutments are fabricated from Acetal polymer and Polycarbonate, an easily modified polymer. It occurs to be among the strongest and stiffest of all thermoplastics. Acetal Features:Has a good fatigue life Low moisture sensitivityHigh resistance to solventsHigh resistance to chemicalsThis material is perfect for producing highly accurate and detailed full partials for direct investment casting models in the lab. This is the item of choice for every casting modeling procedure.Our abutments were produced using injection molding technology. Material for the part is fed into a heated barrel, mixed, and forced into a mold cavity, where it cools and hardens to the configuration of the cavity.This unique process provides high-quality surface finish on our castable abutments and makes them strong and stiff and yet they burn out completely. Abutment Features:Strong and stiffHigh-quality surface finishHigh-quality materialsThe material used in the process must be selected precisely to compensate for the dimensional changes that occur during the casting investment, including setting shrinkage/expansion of the casting investment. THE LOT IS FOR 10 DSI STRAIGHT PLASTICCONICALUCLA CASTABLE ABUTMENTS NP Please mention the desired type in a note to a seller during the checkout. If none is selected, a random type will be sent.

Read More

10pcs DSI Abutment Anatomic Angulated 15° Conical Connection RP Ø5.0-4.3mm

3 de agosto de 20260

10pcs DSI Dental Abutment Anatomic Angulated 15° Conical Connection RPØ5.0-4.3mmDSI Conical Connection Abutment offering an aesthetic solution by all indications. The Conical Connection abutment gives you a long-lasting functional and great aesthetic result. The internal conical connection offers a tight seal and high mechanical strength. It gives the restoration the stability required for a perfect predictable result.This is an excellent solution for angled implants where direct alignment of the implant is not possible. It is very convenient in difficult cases of reconstruction at all stages of treatment. Made from the highest grade medical grade titanium available in Grade 5 to ensure the best results and ensure biocompatibility. The coating - titanium nitrate - is a special coating that has proven to be more wear resistant and better biocompatible. This conical abutment is intended for immediate installation. Protects the implantation site from the penetration of foreign objects into the oral cavity. Advantages:Precision, self-locking, rotation-resistant Simple, fast and accurate positioning of the abutmentExcellent tactile sensibility during placementHigh stability restorationsFast insertion and excellent primary stability State-of-the-art design features to minimize the risk of peri-implant complications Indications:Conical Connection SystemAbutment Height 10mm / 11.5mm / 13.0mmCollar Height 1.5mm / 3.0mm / 4.5mmDiameter: Ø5.0mm Abutment Angle 15°Intended for: DSI conical connection implants and Nobel Active implants RP Ø5.0-4.3mmMaterial: Titanium THE LOT IS FOR 10 DSI CONICAL CONNECTION ANGULATED ANATOMIC ABUTMENTS 15° RP Ø5.0-4.3mm

Read More

10pcs DSl Abutment Anatomic Angulated 25° Conical Connection RP Ø5.0-4.3mm

3 de agosto de 20260

10pcs DSI Dental Abutments Anatomic Angulated 25° Conical Connection RPØ5.0-4.3mmDSI Conical Connection Abutment offering an aesthetic solution by all indications. The Conical Connection abutment gives you a long-lasting functional and great aesthetic result. The internal conical connection offers a tight seal and high mechanical strength. It gives the restoration the stability required for a perfect predictable result.This is an excellent solution for angled implants where direct alignment of the implant is not possible. It is very convenient in difficult cases of reconstruction at all stages of treatment. Made from the highest grade medical grade titanium available in Grade 5 to ensure the best results and ensure biocompatibility. The coating - titanium nitrate - is a special coating that has proven to be more wear resistant and better biocompatible. This conical abutment is intended for immediate installation. Protects the implantation site from the penetration of foreign objects into the oral cavity. Advantages:Precision, self-locking, rotation-resistant Simple, fast and accurate positioning of the abutmentExcellent tactile sensibility during placementHigh stability restorationsFast insertion and excellent primary stability State-of-the-art design features to minimize the risk of peri-implant complications Indications:Conical Connection SystemAbutment Height 10mm / 11.5mm / 13.0mmCollar Height 1.5mm / 3.0mm / 4.5mmDiameter: Ø5.0mm Abutment Angle 25°Intended for: DSI conical connection implants and Nobel Active implants RP Ø5.0-4.3mmMaterial: Titanium THE LOT IS FOR 10 DSI CONICAL CONNECTION ANGULATED ANATOMIC ABUTMENTS 25° RP Ø5.0-4.3mm

Read More

Older Posts

https://www.astefal.com.br/wp-content/uploads/2026/05/logoParaFundoEscuro.png
Opções de menu
Redes sociais
(82) 3221-3067

©2026 Astefal – Assistência e tratamento especializado de fisioterapia em Alagoas LTDA | CNPJ: 14.970.352/0001-84