Plastic castable ab utm ent provides excellent grip and optimal connection to the im pla nt. Made of acetyl, a very strong plastic material that retains its shape. UCLA's are used for aesthetic restorations when tissue is limited.
It is an effective, simple, and convenient solution for most types of restorations where dentures are required to be installed. Has a narrow platform made for use with internal hex 2.00mm. They are tough, corrosion-resistant, and easy to apply.
DSI Loc-in system is designed with customization levels of retention and a low vertical profile. Indicated for use with overdentures or partial dentures retained in whole or in part by dental implants in the mandible or maxilla.
10pcs Dental Prosthetic Straight Loc In Attachment Abutment Internal Hex 2.0mm Implant overdenture is regarded as a secure and very effective treatment for patients who need full-arch rehabilitation. DSI Loc-In ensures superior primary stability and offers the ultimate choice for a wide range of clinical cases and loading protocols. Please mention the desired height in a note to a seller during the checkout. If none is selected, a random type will be sent. Implant overdenture is regarded as a secure and very effective treatment for patients who need full-arch rehabilitation. Though, implants ideally ought to be as parallel as they can; patients are frequently presented with alveolar bone volumes requiring implant placement in non-ideal positions. DSI Loc-in system is designed with customization levels of retention and a low vertical profile. The hexagonal connection ensures a secure fit between the abutment and the implant, minimizes micro-movements, ensures a very tight marginal seal, and protects the implant's crestal zone from oral cavity clutter penetration. Indicated for use with overdentures or partial dentures retained in whole or in part by dental implants in the mandible or maxilla. DSI Loc-In presents uncompromising accuracy, a consistent concave emergence profile for excellent soft-tissue reaction, and high esthetic results. Ensures superior primary stability and offers the ultimate choice for a wide range of clinical cases and loading protocols. Ready-to-use Loc-in abutments have always been seen as being a simple and effective overdenture system because of their low height, dual retention, plus a simple pick-up technique put together with easy long-term maintenance. It has an innovative ability to pivot, which increases the attachment's resiliency and tolerance for the high mastication forces. It allows it to compensate for the path of insertion even with up to 14 degrees of divergence between implants and provides exceptional durability. The overdenture could be easily inserted and moved by patients. DSI Loc-In attachments have incredible resiliency and tolerance for the high mastication forces an attachment must withstand. Compatible with: AB, Alpha bio, MIS, Adin, Cortex, Surcam, paltop, zimmer. Has a narrow platform made for use with internal hex 2.00mm. Made of the highest level available of medical titanium at Grade 5, to provide the best results and allow biological compatibility.They are tough, corrosion-resistant, and easy to apply. Advantages of titanium:Low specific weight.High strength-to-weight ratio.High corrosion resistance.Excellent general biocompatibility. Locator males allow for insertion of the overdenture with a minimum of 0 degrees and with up to an extensive 60 degrees of divergence between implants and are available with 0.6, 1.2, 1.8, and 2.6 kg of retention forces. Retention force can be evaluated chair side depending on patient preference for the level of ease of insertion and removal of extended range. Once seated the Loc-In attachment's dual retention feature provides a firm connection both inside and outside of the attachment, delivering twice the amount of retention surface area compared to other attachments, also once seated, the Loc-In male remains in static contact with the attachment. Its dual retention feature ensures the long-lasting performance of the attachment. Features: A secure fit between the abutment and the implant. Easy maintenance by the patient. Excellent aesthetic results. Stability over a long time. The rounded edges of the abutment help to guide the male in the denture into place.It has incredible resiliency for the high mastication forces.Optimal retention.Has a narrow platform made for use with internal hex 2.00mm. Made of the highest level available of medical titanium at Grade 5, to provide the best results and allow biological compatibilityDesigned to accommodate the maximum denture-bearing area.Hygiene-friendly construction. Much more aesthetic and better look.Ideal for all overdenture patients.THE LOT IS FOR 10 STRAIGHT LOC IN ATTACHMENTS INTERNAL HEX 2.0MM
1pcs Dental Prosthetic Straight Loc In Attachment Abutment Internal Hex 2.0 Implant overdenture is regarded as a secure and very effective treatment for patients who need full-arch rehabilitation. DSI Loc-In ensures superior primary stability and offers the ultimate choice for a wide range of clinical cases and loading protocols. Implant overdenture is regarded as a secure and very effective treatment for patients who need full-arch rehabilitation. Though, implants ideally ought to be as parallel as they can; patients are frequently presented with alveolar bone volumes requiring implant placement in non-ideal positions. DSI Loc-in system is designed with customization levels of retention and a low vertical profile. The hexagonal connection ensures a secure fit between the abutment and the implant, minimizes micro-movements, ensures a very tight marginal seal, and protects the implant's crestal zone from oral cavity clutter penetration. Indicated for use with overdentures or partial dentures retained in whole or in part by dental implants in the mandible or maxilla. DSI Loc-In presents uncompromising accuracy, a consistent concave emergence profile for excellent soft-tissue reaction, and high esthetic results. Ensures superior primary stability and offers the ultimate choice for a wide range of clinical cases and loading protocols. Ready-to-use Loc-in abutments have always been seen as being a simple and effective overdenture system because of their low height, dual retention, plus a simple pick-up technique put together with easy long-term maintenance. It has an innovative ability to pivot, which increases the attachment's resiliency and tolerance for the high mastication forces. It allows it to compensate for the path of insertion even with up to 14 degrees of divergence between implants and provides exceptional durability. The overdenture could be easily inserted and moved by patients. DSI Loc-In attachments have incredible resiliency and tolerance for the high mastication forces an attachment must withstand. Compatible with: AB, Alpha bio, MIS, Adin, Cortex, Surcam, paltop, zimmer. Has a narrow platform made for use with internal hex 2.00mm. Made of the highest level available of medical titanium at Grade 5, to provide the best results and allow biological compatibility.They are tough, corrosion-resistant, and easy to apply. Advantages of titanium:Low specific weight.High strength-to-weight ratio.High corrosion resistance.Excellent general biocompatibility. Locator males allow for insertion of the overdenture with a minimum of 0 degrees and with up to an extensive 60 degrees of divergence between implants and are available with 0.6, 1.2, 1.8, and 2.6 kg of retention forces. Retention force can be evaluated chair side depending on patient preference for the level of ease of insertion and removal of extended range. Once seated the Loc-In attachment's dual retention feature provides a firm connection both inside and outside of the attachment, delivering twice the amount of retention surface area compared to other attachments, also once seated, the Loc-In male remains in static contact with the attachment. Its dual retention feature ensures the long-lasting performance of the attachment. Features: A secure fit between the abutment and the implant. Easy maintenance by the patient. Excellent aesthetic results. Stability over a long time. The rounded edges of the abutment help to guide the male in the denture into place.It has incredible resiliency for the high mastication forces.Optimal retention.Has a narrow platform made for use with internal hex 2.00mm. Made of the highest level available of medical titanium at Grade 5, to provide the best results and allow biological compatibilityDesigned to accommodate the maximum denture-bearing area.Hygiene-friendly construction. Much more aesthetic and better look.Ideal for all overdenture patients.THE LOT IS FOR 1 STRAIGHT LOC IN ATTACHMENT INTERNAL HEX 2.0
It is an effective, simple, and convenient solution for most types of restorations where dentures are required to be installed. Has a narrow platform made for use with internal hex 2.00mm. They are tough, corrosion-resistant, and easy to apply.
10pcs Plastic Castable UCLA Straight Abut me nts Internal Hex 2.0mm Plastic castable ab utm ent provides excellent grip and optimal connection to the im pla nt. Made of acetyl, a very strong plastic material that retains its shape. It is perfect for the highly accurate and detailed full partials for direct investment casting. UCLA's are used for aesthetic restorations when tissue is limited. Please mention the desired type in a note to a seller during the checkout. If none is selected, a random type will be sent. Does not expand or shrink during preparation and maintains dimension stability throughout the process. Acetyl dissolves from the investment without leaving any residue at all and gives the best results. The castable abut ment has a narrow platform made for use with internal hex 2.0mm. There are two types of connection available: Anti-rotational (Hexagon) – for custom casting prosthetic restorations on a single imp la nt or multiple implants Rotational (Cylindrical) – for custom casting prosthetic restorations – only on multiple im pla nt structures. Acetal Features:Has a good fatigue life. Low moisture sensitivity.High resistance to solvents.High resistance to chemicals. Abutment Features:Strong and stiff.High-quality surface finish.High-quality materials. THE LOT IS FOR 10 PLASTIC CASTABLE UCLA STRAIGHT ABUTME NTS INTERNAL HEX 2.0MM
1x Kit Straight Loc In Attachment Abutment Internal Hex 2.0 + 4 Silicone Caps + Titanium Housing + Isolate Ring Kit includes:1pcs - Straight Loc-In Premium Overdenture Attachment Narrow Slim For Implant 3.00mm Internal Hex 2.00mm (to choose from: 1mm/2mm/3mm/4mm/5mm/6mm)1pcs - Clear Standard Retention Silicone Cap (1.8kg)1pcs - Pink Soft Retention Silicone Cap (1.2kg)1pcs - Yellow Extra Soft Retention Silicone Cap (0.6kg)1pcs - Black Laboratory Silicone Cap (zero retention)1pcs - Metal Housing1pcs - Isolate Ring Implant overdenture is regarded as a secure and very effective treatment for patients who need full-arch rehabilitation. DSI Loc-In ensures superior primary stability and offers the ultimate choice for a wide range of clinical cases and loading protocols. Implant overdenture is regarded as a secure and very effective treatment for patients who need full-arch rehabilitation. Though, implants ideally ought to be as parallel as they can; patients are frequently presented with alveolar bone volumes requiring implant placement in non-ideal positions. DSI Loc-in system is designed with customization levels of retention and a low vertical profile. The hexagonal connection ensures a secure fit between the abutment and the implant, minimizes micro-movements, ensures a very tight marginal seal, and protects the implant's crestal zone from oral cavity clutter penetration. Indicated for use with overdentures or partial dentures retained in whole or in part by dental implants in the mandible or maxilla. DSI Loc-In presents uncompromising accuracy, a consistent concave emergence profile for excellent soft-tissue reaction, and high esthetic results. Ensures superior primary stability and offers the ultimate choice for a wide range of clinical cases and loading protocols. Ready-to-use Loc-in abutments have always been seen as being a simple and effective overdenture system because of their low height, dual retention, plus a simple pick-up technique put together with easy long-term maintenance. It has an innovative ability to pivot, which increases the attachment's resiliency and tolerance for the high mastication forces. It allows it to compensate for the path of insertion even with up to 14 degrees of divergence between implants and provides exceptional durability. The overdenture could be easily inserted and moved by patients. DSI Loc-In attachments have incredible resiliency and tolerance for the high mastication forces an attachment must withstand. Compatible with: AB, Alpha bio, MIS, Adin, Cortex, Surcam, paltop, zimmer. Has a narrow platform made for use with internal hex 2.00mm. Made of the highest level available of medical titanium at Grade 5, to provide the best results and allow biological compatibility.They are tough, corrosion-resistant, and easy to apply. Advantages of titanium:Low specific weight.High strength-to-weight ratio.High corrosion resistance.Excellent general biocompatibility. Locator males allow for insertion of the overdenture with a minimum of 0 degrees and with up to an extensive 60 degrees of divergence between implants and are available with 0.6, 1.2, 1.8, and 0 kg of retention forces. Retention force can be evaluated chair side depending on patient preference for the level of ease of insertion and removal of extended range. Once seated the Loc-In attachment's dual retention feature provides a firm connection both inside and outside of the attachment, delivering twice the amount of retention surface area compared to other attachments, also once seated, the Loc-In male remains in static contact with the attachment. Its dual retention feature ensures the long-lasting performance of the attachment. Features: A secure fit between the abutment and the implant. Easy maintenance by the patient. Excellent aesthetic results. Stability over a long time. The rounded edges of the abutment help to guide the male in the denture into place.It has incredible resiliency for the high mastication forces.Optimal retention.Has a narrow platform made for use with internal hex 2.00mm. Made of the highest level available of medical titanium at Grade 5, to provide the best results and allow biological compatibilityDesigned to accommodate the maximum denture-bearing area.Hygiene-friendly construction. Much more aesthetic and better look.Ideal for all overdenture patients.THE LOT IS FOR 1 KIT STRAIGHT LOC IN ATTACHMENT INTERNAL HEX 2.0MM + 4 SILICONE CAPS + METAL HOUSING + ISOLATE RING
Compatible with: MIS Seven. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Great trauma reduction during the insertion and removal of the healing cap. It protects the fixture site from clutter penetration. They are slightly wider than the fixture to help shape the gumline.
