The filters fit well, securely and durable, have reasonable flow for the filtration size, are sturdy, and allow you to easily visually inspect the filtered material. The filter picked up a lot more material than you expected and still had more life left.
Omicron - Triple Layered Syringe FilterThe AD/X range is specifically designed for high particulate loaded samples. Constructed of a pigment-free polypropylene housing with two additional layers of Glass Microfibre filters, these filters eliminate sample contamination and allow you to filter even the most difficult samples with less hand pressure. AD/X syringe filters can process three to seven times more sample volume than standard syringe filters. The glass microfibre prefilters are produced from 100% borosilicate glass microfiber in Germany. Top layer retains particles to 1.0 μm. A GF/FF filter then retains particles down to 0.7 μm. The prefilter stack ends with a final membrane. AD/X filter construction facilitates exceptional loading capacity with fast flow rates. This prevents the build up of back pressure typically caused by the blocking of an unprotected membrane. Features• 25 mm diameter syringe filters • 25 mm devices for samples greater than 10 ml (however, the volume of sample that can be filtered through each filter depends on the characteristics of the sample) • Sterile options • Pigment-free polypropylene housing Benefits• Eliminates sample contamination • Requires less hand pressure, even with the most difficult samples • Processes three to seven times more sample volume
Nylon66Syringe filters with Luer Lock 25mm / 0.45um 100/pk. · nylon syringe filters are specifically designed for clarification of aqueous and solvent samples in a wide array of analytical and research applications.
Pore sizes: 0.22 µm or 0.45 µm. Multiple Pore Size Options – Available in 0.22 µm for sterilizing filtration and 0.45 µm for clarification and particulate removal, supporting a wide range of laboratory workflows.
Hydrophilic Nylon is ideal for aqueous (non-acidic) or organic sample prep and HPLC, GC or dissolution sample analysis. Hydrophilic property. Wettability Hydrophilic. Sterile Nylon Syringe Filters are individually wrapped sterile, certified RNA-free, DNA- free, and DNA –free with Non-phylogenic.
Hydrophilic Nylon is ideal for aqueous (non-acidic) or organic sample prep and HPLC, GC or dissolution sample analysis. Syringe Filters for Cell Culture provide effective filtration for a wide variety of sample types.
Introduction:Membrane Solutions offer universal application for analytical procedures. Hydrophilic Nylon is ideal for aqueous (non-acidic) or organic sample prep and HPLC, GC or dissolution sample analysis. With its excellent flow characteristics, very low extractable levels and mechanical stability, Nylon offers the best combination of physical parameters to meet the most stringent analytical needs in 13mm/25mm diameters and 0.45μm/0.22μm Pore Size. The naturally hydrophilic, high protein binding and high dirt loading capacity of Nylon are natural advantages.Applications: Electric semiconductor industrial water filtration Chemicals filtration Beverage filtration Features: Hydrophilic property No need to moist beforehand Uniform aperture Strong tenacity and absorbability Syringe Filters for Cell Culture provide effective filtration for a wide variety of sample types Designed with a Female Lure-Lock inlet and Male Lure-Slip outlets Sterile Nylon Syringe Filters are individually wrapped sterile, certified RNA-free, DNA- free, and DNA –free with Non-phylogenicNylon Syringe Filter Pore Size: 0.45μm, Diameter: 13mm Part No.SFNY013045NIFilter MediumNylonFilter Diameter(mm)17Membrane Diameter(mm)13Pore Size(μm)0.45WettabilityHydrophilicSterileNoFiltration Area(cm²)0.92Housing MaterialPPHoldup-Volume(μl)<10Volume Throughput(ml)<10Connections(Inlet/Outlet)Female Luer Lock inlet and Male Luer slip outletMax Operating Pressure(psi)87Max Operating Temperature(℃)100 Nylon Syringe Filter Pore Size:0.22μm, Diameter:13mmPart No.SFNY025022NCUFilter MediumNylonFilter Diameter(mm)17Membrane Diameter(mm)13Pore Size(μm)0.22WettabilityHydrophilicSterileNoFiltration Area(cm²)0.92Housing MaterialPPHoldup-Volume(μl)<10Volume Throughput(ml)<10Connections(Inlet/Outlet)Female Luer Lock inlet and Male Luer slip outletMax Operating Pressure(psi)87Max Operating Temperature(℃)100Nylon Syringe Filter Pore Size:0.45μm, Diameter:25mmPart No.SFNY025022NCUFilter MediumNylonFilter Diameter(mm)30Membrane Diameter(mm)25Pore Size(μm)0.22WettabilityHydrophilicSterileNoFiltration Area(cm²)2.98Housing MaterialPPHoldup-Volume(μl)<100Volume Throughput(ml)<50Connections(Inlet/Outlet)Female Luer Lock inlet and Male Luer slip outletMax Operating Pressure(psi)87Max Operating Temperature(℃)100Nylon Syringe Filter Pore Size:0.22μm, Diameter:25mmPart No.SFNY025022NCUFilter MediumNylonFilter Diameter(mm)30Membrane Diameter(mm)25Pore Size(μm)0.45WettabilityHydrophilicSterileNoFiltration Area(cm²)2.98Housing MaterialPPHoldup-Volume(μl)<100Volume Throughput(ml)<100Connections(Inlet/Outlet)Female Luer Lock inlet and Male Luer slip outletMax Operating Pressure(psi)87Max Operating Temperature(℃)100Package list: 1. 10pcs Syringe Filters 2. 100pcs Syringe Filters 3. 500pcs Syringe Filters4. 1000pcs Syringe Filters5. 3000pcs Syringe Filters
Nylon Syringe Filter:sterile / non-sterile 2 types (selection). ■Pore size. ▼ Syringe filter structure type ‣ 4 mm, 13 mm, 17 mm, 25 mm, 30 mm, 33 mm, 50 mm. ‣ PES (Polyethersulfone), MCE, Hydrophilic/Hydrophobic PVDF, PTFE, Nylon.
Nylon Syringe Filter:sterile / non-sterile 2 types (selection). ■Pore size. ▼ Syringe filter structure type ‣ 4 mm, 13 mm, 17 mm, 25 mm, 30 mm, 33 mm, 50 mm. ‣ PES (Polyethersulfone), MCE, Hydrophilic/Hydrophobic PVDF, PTFE, Nylon.
